Find your symptom to see the most likely cause.
Most likely cause: ductwork that isn’t getting enough air to that room.
See ductwork repair →Most likely cause: ductwork and return air that weren’t designed for the second floor.
See ductwork repair →Most likely cause: an AC that’s cooling but not removing enough moisture.
See humidity control →Most likely cause: a system that’s mis-sized, starved for airflow or set up wrong.
See the performance checkup →Most likely cause: moisture and mold growing inside the AC system.
See mold in AC →Most likely cause: energy wasted by the system, the ducts or the home itself.
See the energy audit →Most AC service checks whether your system is working: it turns on, the refrigerant is right and the parts run. That’s why so many homeowners hear “your AC is fine.”
But comfort depends on performance, meaning how much cool, dry air actually reaches each room. That depends on how the system was sized, how the ductwork was designed and installed, and how well your home keeps the cool air in.
That’s why we perform AC performance testing, including airflow and static pressure testing, when a system is running but the home still isn’t comfortable. The readings show whether the cause is the system, the ductwork, the house or a combination.
If your house isn’t comfortable, something isn’t performing, even if everything is working.

One bedroom is hot, the living room is cold, and moving the thermostat doesn’t fix it. That’s almost always an airflow or duct problem, not the size of your AC. We measure each room, find why it isn’t getting the right air and correct it, so every room is comfortable.
When a room won’t cool, most people turn the thermostat lower. Some rooms get too cold, the problem room stays hot, and the bill goes up.
The problem isn’t the setting. It’s where the cool air is going, and how much of it actually gets there.
You’re not imagining it. If your home doesn’t feel right, something is causing it, and it can be measured.
Temperature, humidity and airflow, room by room, plus how the system is actually performing.
In plain language, with the numbers, and the price before any work begins.
Ductwork, humidity control, system setup or sizing, whatever your home actually needs.
We measure again, so you can see the difference in every room.

Look up FL HVAC Services on Google and you’ll see a line most AC companies don’t have: “Home energy auditing recognized by the US Dept. of Energy.” Tap it and the Energy Skilled badge pops up, with a link to Energy.gov.
Nobody can add that to a business listing themselves. Not us, and not a marketing company. The U.S. Department of Energy verifies the credential and reports it to Google, and Google puts it on the listing.
What it means for your home: we look at your house and your AC as one system. How outside air leaks in, how humidity builds up, how air moves from room to room, and why some homes end up with stale, stuffy air that makes people feel worse inside than out. Then we design and fix your system for what your home actually needs.
✓ Verified by the U.S. Department of Energy
✓ Shown on our Google listing by Google itself
✓ Trained in humidity, air leaks, airflow and indoor air quality
Usually because that room isn’t getting enough cool air. The duct feeding it may be too small, kinked, leaking or too long, the return air may be wrong, or the room may take on more heat than the rest of the house. Turning the thermostat down won’t fix it. Room-by-room airflow testing shows which it is.
Heat rises and the attic is right above you, but the bigger problem is usually ductwork and return air that weren’t designed to deliver enough cooling to the second floor.
Common causes are ductwork that restricts airflow, a system that’s the wrong size for the home, or air leaks letting hot air in. We measure to find which one it is.
Your AC is supposed to remove moisture as it cools. When the system is oversized or airflow isn’t right, it cools without drying the air, and the house feels sticky.
They’re probably right that it’s working. But working isn’t the same as performing. Comfort depends on how much cool, dry air reaches each room, and that’s where ductwork, sizing and installation come in.
When the equipment has been checked and it runs, but the comfort problem is still there, the next step is performance testing: measuring what the system and the house are actually doing, room by room. That’s how the cause gets found when it isn’t a broken part, and it’s the work we do every day.
Not if the cause is the ductwork or the home. A new system connected to the same ducts often has the same problems. That’s why we find the cause first.
Homes across Central Florida, including Marion, Sumter, Lake, Citrus and Orange Counties and the Orlando area.
FL HVAC Services serves homeowners across Central Florida, including: